Hammer Finish Paint
A fast air drying special effect metallic finish for application by spray, often applied directly to metal. For exterior use, application over over an anti-corrosive primer is recommended.
Typical uses are for machinary, plant, sheet metal, general fabrication work whenever an aesthetic appearance is required with a minimum of surface preparation or when there is need to cover up, or masks surface irregularities, withour first filling and flatting.
A fast air drying special effect metallic finish for application by spray, often applied directly to metal. For exterior use, application over over an anti-corrosive primer is recommended.
Typical uses are for machinary, plant, sheet metal, general fabrication work whenever an aesthetic appearance is required with a minimum of surface preparation or when there is need to cover up, or masks surface irregularities, withour first filling and flatting.
- Supplied
- Colour: Black
Volume: 5 Litre Can
Technical:
- Fast drying special effect metallic finish for metals
Use on:
- Gates
Railings
Ironwork
Machinery
Plant
Sheet Metal
Trailers
etc
Touch dry after 30 mins @ 20°C
(Colour shown is a guide only and may vary slightly to actual product)
Application Details:
- Airless Spray: Not Suitable
Conventional Spray: HVLP Spray is most suitable, 5 to 10% thinners may be added to suit equipment
- Apply 1 mist coat, allow 20 minutes to flash off, then apply 1 full wet coat
- Apply 1 generous coat, spread quickly within minimul brush strokes and leave it, do not layer off and wait for hammer pattern to develope.
Thinners: Industrial Thinner
Additional Information
| Manufacturer | MANOR |
|---|---|
| Brand | Manor |
| Make | Pro Range |
| Manufacturer Part Number | HFBK-5LT |