We are happy to announce we are open again.
We cannot offer the same day dispatch service due to order volumes but orders will be dispatched as soon as possible.

Welcome to MDA Bitec!
Log In

Log In

Forgot Your Password?

Cart Subtotal: £0.00

2.5L Black Hammer Finish Metal Paint Hammered Coating From Bitec

Be the first to review this product

Availability: In stock

Excl. Vat: £23.94 Incl. Vat: £28.73

Quick Overview

Manor 2.5 litre High Build Garage/Industrial Hammer Finish Black Paint
Click main image to zoom & pan
Hammer Finish Paint

A fast air drying special effect metallic finish for application by spray, often applied directly to metal. For exterior use, application over over an anti-corrosive primer is recommended.

Typical uses are for machinary, plant, sheet metal, general fabrication work whenever an aesthetic appearance is required with a minimum of surface preparation or when there is need to cover up, or masks surface irregularities, withour first filling and flatting.
      Colour: Black
      Volume: 2.5 Litre Can

      Fast drying special effect metallic finish for metals
      Use on:
        Sheet Metal
      Surfaces should be dry, sound and free from dirt, dust, rust and grease
      Touch dry after 30 mins @ 20°C
      (Colour shown is a guide only and may vary slightly to actual product)

    Application Details:
      Airless Spray: Not Suitable
      Conventional Spray: HVLP Spray is most suitable, 5 to 10% thinners may be added to suit equipment
        Apply 1 mist coat, allow 20 minutes to flash off, then apply 1 full wet coat
      Brush: *Best results achieved by spraying. Brushing is only suitable for small area
        Apply 1 generous coat, spread quickly within minimul brush strokes and leave it, do not layer off and wait for hammer pattern to develope.
      Roller: Not Recommended
      Thinners: Industrial Thinner

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Additional Information

Manufacturer MANOR
Brand Manor
Make Pro Range
Manufacturer Part Number HFBK-2.5LT

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.