HS CLEAR Lacquer 1.360.0320 5 litre & Fast Hardener 1.954.2740 2.5litres offers high solid content, fast drying, strong film hardness, and excellent gloss. HS CLEAR 1.360.0320 can be used for spot repair, full panel, or total respray for best results and durability. Preperation: Allow AquaMax to dry thoroughly before application of Clearcoat. Clean basecoat colour with a tackrag, before clearcoat application. Mix Ratio: 2:1 Viscosity - DIN4, 20� 1 Hour @ 20�C with 1.954.2740 Note: As with all UHS products, cold RFU paint temperatures can lead to more difficult application and overspray absorption. It is strongly recommended that RFU product is applied at a temperature above 15C Hardener Included: 1.954.2740 Super Rapid Hardener Application Guides:Gravity spray gun nozzle (mm): 1.2-1.3 Pressure at the gun: As per manufacturers recommendations. Number of coats: 1 medium coat + 1 full coat or 2 full coats. Suggested thickness: 50/60 microns Important:Single Visit Process: Apply one medium, continuous coat followed by one full coat. The first coat should be applied to all repair panels before the second coat is applied. For less than 3 panels, 2-3 minutes flash between coats. For more than 3 panels, no flash is required. Two coat Process: Apply 2 full coats with a 5 minute flash off between coats. DO NOT apply more clearcoat than indicated. The recommended build above is easily obtained.