NOTICE UDATED: 12/04/2021
With restrictions now easing, our shop is now open. Please continue to wear face masks while instore. Thank you for your continued support. Stay safe.

*Same day dispatch on orders received before 12pm (Monday to Friday)
**Click and Collect service available

Welcome to MDA Bitec!
Log In

Log In

Forgot Your Password?

Cart Subtotal: £0.00

Manor 2.5lt High Build Garage/Industrial Vinyl Semi-Matt Black Paint 2.5 litre

Be the first to review this product

Availability: In stock

Excl. Vat: £29.12 Incl. Vat: £34.94

Quick Overview

Manor 2.5lt High Build Garage/Industrial Vinyl Semi-Matt Black Paint
Click main image to zoom & pan
    Intended Use:
      Metal Finishing
        A rapid dry 'one coat' anti corrocitve self-priming low sheen topcoat, giving a tough flexible film with remarkable adhesion to many difficult substrates with excellent re-coat characteristics.
      Typical uses are:
        General metal fabrication; used to overcome problems associated with conventional alkyd paints subject to severe exposure conditions often associated with poor adhesion.
        Metal railings and fencing; adheres directly to galvanised metal or steel with no need for mordant solution or etch primers. To ensure white zinc salts do not migrate through the coatings apply 75 microns dft and in a coastal environment at 120 microns dft.
        Metalwork subject to low temperatures, High Build Vinyl remains flexible
        Metalwork subject to high humidity.
        Not suitable for use in areas subject to chemical / solvent attack.
        Articles - that are not part of a building structure (and therefore outside of the scope of the building products VOC Product Directive)
        Inside Building: Machinery, fixed plant, moveable equipment, fork lift trucks, trolleys, frames, guards, etc.
        Outside Building: Exterior surfaces of tanks, pipework and process plant, towers, bridges or any structure which is not part of a building
        Some rigid and flexible plastics; such as Foamex and PVC. Always test prior to painting. Seek advice from MDA Bitec if required
    Suitable Substrates and Preparation
      Untreated steel and wrought ironwork; for best results blast clear prior to painting to SA 2 1/2, otherwise manually abrade using powered hand tools and abrasives to ST2

      Weathered Galvanised Steel; remove all traces of oil or grease, lightly abrade with P600 wet or dry paper. Remove Rust.

      Heavy Chromatid Galvanised Steel; alkali clean and then proceed as for Bright Spangled Galvanised Steel

      Bright Galvanised Steel and Newly Galvanised Steel (less than 6 months since galvanising); remove oil or grease, thoroughly abrade with P600 wet or dry, remove dust.

      Aluminium; use 1 Pack Etch Primer CT
    Always prepare a test area
      Other Substrate seek advice from MDA Bitec
    Product Information:
      Volume Solids: 31%
      Weight Solids: 43%
      Typical film thickness:
        242 microns wet film thickness to give 75 microns dry film thickness<
      Theoretical Coverage:
        4.1sq meters/litre at 75 microns dry film thickness
      Drying and Recoating:
        (approximate drying times at 50 microns d.f.t)
    Substrate Temperature:
        Touch Dry in 45 Minutes
        Over coating in 2 hours (Minimum)
        Touch Dry in 20 Minutes
        Over coating in 1 hour (Minimum)
        Please note this item is decanted from a 5 litre can so will be sent in a plain white can

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Additional Information

Manufacturer MANOR
Brand Manor
Make Pro Range
Manufacturer Part Number HBVBK-2.5LT

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.