Comprehensive ancillary range to complement and enhance the performance of the MaxMeyer paint system, from preparation to final repair. Anti silicone Degreaser 3600 is recommended for use on every job and is an alternative to the Aquamax Precleaner. This product is especially designed to remove dirt, oils, waxes, silicone and other contaminant agents from bare metal areas before painting larger areas. Degreaser 3600 is best used from a pump spray bottle and for safety reasons, it is best used in an extracted area to prevent any solvent build up.
- How to use:
- Apply generously with a clean cloth. While area is still wet, dry with another clean dry cloth.
Degrease one part/area at a time, avoiding treatment of different areas at the same time.
Be careful not to allow the degreaser to dry on the substrate.
- Note:
The use of an ultrafine Scotch-Brite soaked with antisilicone degreaser 3600 is strongly recommended for maximum effectiveness.
1 x 5 Litre Can
Additional Information
| Manufacturer | MaxMeyer |
|---|---|
| Brand | MaxMeyer |
| Make | MaxMeyer |
| Manufacturer Part Number | 1.931.3600 |