HS CLEAR 1.360.0300 offers high solid content, fast drying, strong film hardness, and excellent gloss, with the flexibility of different hardener options, and simple mixing ratios for different types of repair.
HS CLEAR 1.360.0300 can be used for spot repair, full panel, or total respray for best results and durability.
HS CLEAR 1.360.0300 can be used for spot repair, full panel, or total respray for best results and durability.
- Preperation:
- Allow AquaMax to dry thoroughly before application of Clearcoat. Clean basecoat colour with a tackrag, before clearcoat application.
Mix Ratio: 2:1
Viscosity - DIN4, 20º
- 18 - 20 Seconds
1 Hour @ 20ºC with 1.954.2730
1.5 Hours @ 20ºC with 1.954.2720
- Hardeners:
- 1.954.2730 Up to 18ºC
1.954.2720 18ºC-30ºC
- Application Guides:
- Gravity spray gun nozzle (mm): 1.2-1.3
Pressure at the gun: As per manufacturers recommendations.
Number of coats: 1 medium coat + 1 full coat or 2 full coats.
Suggested thickness: 50/60 microns
- Single Visit Process: Apply one medium, continuous coat followed by one full coat. The first coat should be applied to all repair panels before the second coat is applied. For less than 3 panels, 2-3 minutes flash between coats. For more than 3 panels, no flash is required.
Two coat Process: Apply 2 full coats with a 5 minute flash off between coats. DO NOT apply more clearcoat than indicated. The recommended build above is easily obtained.
Additional Information
Manufacturer | Max Meyer |
---|---|
Brand | Max Meyer |
Make | High Solids |
Manufacturer Part Number | 1.360.0300/5KIT |