Fast Mover Tools air filter regulator unit with 3 filters and disassembly tool

FMT3003 Air regulator unit is designed to remove dirt, liquid, oil and water from flowing compressed air. With air filtration down to 0.01 microns and activated carbon removing contaminants down to 0.003 ppm for both breathing and spraying. Filters should be replaced every 3 months. Genuine Micron replacement filter for FMT3003 and FMT3002. First stage filter and will filter the incoming air down to 0.5 Microns, filtering most dust particulates and solids. Genuine coalescing replacement filter for FMT3003 and FMT3002 Air Filter Unit. Second stage filter and will filter the air down to 0.001micron. Removes water vapour and oil droplets in the air. Genuine activated carbon replacement filter for FMT3003 3 Stage Air Filter Unit. Activated carbon for the third stage on FMT3003. Filters should be replaced every 3 months or when odours can be smelt in the head top unit. Suggested replacement frequency is every 3 months. If there is a noticeable restriction in airflow or odours can be smelt when wearing the head top, then the filter should be replaced immediately. Failure to replace with genuine parts will invalidate product compliance. Includes Disassembly tool. Tool to be used for disassembling the bowls from the main filter block. Designed for Fast Mover 3 stage breathing air filter regulator unit FMT3003 and Fast Mover 2 stage breathing air filter regulator unit FMT3002.