Hammer Finish (Black) 5 litre

Hammer Finish Paint is a fast air drying special effect metallic finish for application by spray, often applied directly to metal. For exterior use, application over over an anti-corrosive primer is recommended.

Typical uses are for machinary, plant, sheet metal, general fabrication work whenever an aesthetic appearance is required with a minimum of surface preparation or when there is need to cover up, or masks surface irregularities, withour first filling and flatting.

Supplied
Colour:Black
Volume:5 Litre Can

Technical:
Fast drying special effect metallic finish for metals
Use on:
Gates
Railings
Ironwork
Machinery
Plant
Sheet Metal
Trailers
etc
Surfaces should be dry, sound and free from dirt, dust, rust and grease
Touch dry after 30 mins @ 20°C
(Colour shown is a guide only and may vary slightly to actual product)

Application Details:
Airless Spray:Not Suitable
Conventional Spray:HVLP Spray is most suitable, 5 to 10% thinners may be added to suit equipment
Apply 1 mist coat, allow 20 minutes to flash off, then apply 1 full wet coat
Brush: *Best results achieved by spraying.Brushing is only suitable for small area
Apply 1 generous coat, spread quickly within minimul brush strokes and leave it, do not layer off and wait for hammer pattern to develope.
Roller:Not Recommended
Thinners:Industrial Thinner