Pro Range 1 x 1 Litre Grey Stone Chip + Spray Gun Can be over Painted Paintable

A tough, flexible corrosion and chip resistant coating for all-round protection and sound deadening qualities. Suitable for all lower body panels vulnerable to stone chips. Stonechip is not suitable for use on synthetic painted surfaces.

What you will receive:
1 x 1 litre can
Colour: Grey
Applicator: YES:
1 x FMT626 Spray Gun Air Compressor
Technical Details:
Air Inlet: 1/4"
Working Pressure: 30-120PSI / 2-8.3BAR
Maximum Pressure: 150PSI/10BAR

Features & Benefits:
• A tough, flexible corrosion and chip resistant coating for all-round protection and sound deadening qualities.
• Suitable for all lower body panels vulnerable to stone chips.
• Stonechip is not suitable for use on synthetic painted surfaces.
Always ensure the surface to be treated is suitably prepared, and fully degreased with Tetrosyl Panel Wipe.
Directions For Use:
Shake can thoroughly before use. Minimum of two minutes.
Spray at a pressure of 40/80 p.s.i and at a distance of 30-45 cm.
Stonechip when fully cured may be overcoated with compliant refinishing paint systems.

Always ensure the surface to be treated is suitably prepared, and fully degreased with any industrial Panel Wipe.
Check that the spray gun is clean and free from blockages ( excess pressure may cause the can to burst.)
Coverage:
• Approximately 8 square metres per litre.
Cleaning:
• Compliant Gun Wash
Storage:
• This product is subject to regulations governing the storage of highly flammable liquids and liquefied petroleum gases.
Safety:
• Please request Material Safety Data Sheet (MSDS)
Colour Availability
• Black: 1Litre
• Grey: 1Litre
• White: 1Litre