One fitted with a 1.4mm nozzle Ant the other fitted with a 1.8mm nozzle
The FLG-G5 Spray gun is approved to ATEX regulations 94/9/EC, protection level; II 2 G X. Suitable for use in Zones 1 and 2
The FLG-G5 spray guns are not suitable for use with waterborne materials. The design uses EPA compliant atomising (DeVilbiss Trans-Tech®) technology to reduce overspray and improve coating efficiency. Nozzles and needles are manufactured in stainless steel. These guns are not designed for use with highly corrosive and/or abrasive materials and if used with such materials it must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt regarding the suitability of a specific material contact our MDA Bitec customer services.
Specifications:
Air supply connection - Universal ¼” BSP and NPS Maximum static air inlet pressure - P1 = 12 bar (175 psi) Nominal gun inlet pressure with gun triggered - 2.4 bar (35 psi) Maximum service temperature - 40�℃ Gun weight - 642 g Air flow - 277 l/min (9.8 cfm)
Materials of Construction:
Gun body - Aluminium Nozzle - Stainless steel Needle - Stainless steel Cup - Plastic
Please Note you get 2 x FLG-G5 Spray Guns with this listing one with a 1.4mm Tip and the other with a 1.8mm Tip