Devilbiss FLG-5-14 Gravity Spray Paint Gun 1.4mm Tip + Finer Pressure Regulator

The FLG-G5 Gravity-feed Spray gun is fitted with a 1.4mm nozzle for topcoat applications. and is supplied with a the Devilbiss Air Pressure Regulator HAV-501-B
The FLG-G5 Spray gun is approved to ATEX regulations 94/9/EC, protection level; II 2 G X. Suitable for use in Zones 1 and 2

The FLG-G5 spray guns are not suitable for use with waterborne materials. The design uses EPA compliant atomising (Devilbiss Trans-Tech�) technology to reduce overspray and improve coating efficiency. Nozzles and needles are manufactured in stainless steel. These guns are not designed for use with highly corrosive and/or abrasive materials and if used with such materials it must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt regarding the suitability of a specific material contact our MDA Bitec customer services.

Specifications:
Air supply connection - Universal �" BSP and NPS
Maximum static air inlet pressure - P1 = 12 bar (175 psi)
Nominal gun inlet pressure with gun triggered - 2.4 bar (35 psi)
Maximum service temperature - 40℃
Gun weight - 642 g
Air flow - 277 l/min (9.8 cfm)

Materials of Construction:
Gun body - Aluminium
Nozzle - Stainless steel
Needle - Stainless steel
Cup - Plastic

DeVilbiss HAV-501-B Air Adjusting Valve

Fits neatly in-line at the gun air inlet
Can increase or decrease working pressure right at the gun
Calibrated up to 11 Bar (160 psi)