Search
Toggle Nav
01952 583203 (Ext. 1)
DeVilbiss SLG-610 1.3 mm Starting Line Gravity Fed Spray Gun & Mini Water Filter
Devilbiss StartingLine SLG-610 1.3 mm Spray Gun Gravity Feed Sprayer For Solvent Paint perfect entry spraygun for solvent paints + Dry Air Filter
£76.80
£64.00
Availability:
Out of stock
SKU
SLG-610_FILTER
- What you will receive:
- SLG-610 DeVilbiss SLG-610 1.3mm Air Paint Gun
- SGC13 13 Piece Gun Cleaning Kit
DeVilbiss SLG-610 �Starting Line" Spraygun (1.3mm) CONVENTIONAL SOLVENT GUN Suitable for small compressors this model is a budget priced spraygun with conventional atomisation targeted at small jobbing car refinish painters where low output portable compressors are frequently in use.
- Air inlet connection thread: 1/4"
- Recommended working pressure: 2.5 bar (35psi)
- Max inlet pressure: 4 bar
- Setup: 1.3mm
Suitable for most automotive refinish general single layer materials
Lightweight but strong, plated, cast aluminium spraygun body construction
Comfortable ergonomic handle
Smooth trigger action for ease of operator control when feathering or bleeding
Easy-to-adjust air inlet pressure, spray pattern shape (full fan to round) and fluid controls
The air cap only consumes 136 L/min (4.8 cfm) so a small portable 1hp / 5 cfm air compressor is sufficient to operate the spraygun
SLG-610 sprayguns are supplied as ready to use "Refinisher Kits", complete with a 550ml cup, filter, cleaning brush & universal spanner
Technical SpecificationsL
- Mini air filter and water trap for use with gravity feed spray guns
- Details:
- Water can be drained from the trap by a non return valve at the bottom.
Trap has a standard 1/4BSP male and female thread allowing it to fit easily onto any spray gun or air tool and then onto the compressed air hose.
Size 90mm
Max air pressure 140PSI
| Brand | FinishLine |
|---|---|
| Make | DeVilbiss |
| Manufacturer | DeVilbiss |
| Manufacturer Part Number | SLG-610 |
| Grit | No |
Write Your Own Review